PowerShaper XL, 60kW/225kWh, Fan-filter, LFP

Pixii

PowerShaper XL

60kW/225kWh, Fan-filter, LFP

Highlights

Shipped with batteries installed
Safe and stable LFP batteries
Modular and scalable
Galvanic isolation (AC-DC)
European quality & GDPR compliance
Safe ~48V installation and operation

Key functions

PV self-consumption
Peak shaving
Balance market participation
Electricity market participation

Download datasheet

Požiadajte o cenovú ponuku

Fully integrated, pre-wired and factory configured system that reduces the installation time significantly.

The BESS that pays for itself by earning from electricity markets and saving cost through peak shaving and power boost.

Designed and manufactured in Europe. Combining robust engineering with high-quality components to deliver modular, scalable and reliable energy storage for critical applications and demanding environments.

Our 48V systems are built for always-on operation. Encrypted communications, secure remote access, and full GDPR compliance, enabling uninterrupted connectivity, real-time insight, and maximum ROI through value stacking.

Pixii BESS feature built-in redundancy, active monitoring, and automated recovery protocols. This ensures secure operation even under failure or cyber threat, ideal for mission-critical energy storage needs.

PowerShaper XL is delivered pre-wired and pre-configured using standard Pixii components, including Pixii Gateway. To simplify installation, systems can be shipped with batteries already in place.

Equipped with safe LFP batteries and built for long-duration use. Offers more than four times the energy capacity of the traditional PowerShaper. Ideal for high energy demand sites.

Grid connection type

TT / TN

Phase config. (grid) ²

3ph

AC voltage (-10/+15%)

400V

Nominal AC voltage range

207 – 260V

Nominal frequency (grid)

50Hz

Nominal AC current

86Arms (3Ph+N+PE)

Max. AC current (input)

99Arms (3Ph+N+PE)

Nom. cont. AC power (±2%) ¹

60kW

Max. AC power (±2%)

60kWp

Max. apparent power

60kVA

Max. reactive power

54kVAr

Power factor (Cos φ leading)

0.5 – 1

Power factor (Cos φ lagging)

0.5 – 1

THDi (grid connection)

<5%

Off-grid operation support ³

Yes

Generator backup support

Yes

Phase config. (genset) ⁴

1ph, 3ph

Frequency range (genset)

45 – 66Hz

1. The stated power and energy capacities are baseline, or nominal, values. Actual performance can vary and may be constrained by several factors, including the state of charge (SoC), state of health (SoH) of the system, as well as thermal conditions.
2. A 3-phase connection requires at least three PixiiBoxes, one for each phase.
3. Single cabinet only. Requires off-grid control system. Local modification for load prioritization.
4. A 3-phase connection requires at least three PixiiBoxes, one for each phase.