PowerShaper XLP, 100kW/225kWh, Multi-cooling, LFP

Pixii

PowerShaper XLP

100kW/225kWh, Multi-cooling, LFP

Highlights

Shipped with batteries installed
Dual-zone active cooling system
Modular and scalable
Galvanic isolation (AC-DC)
European quality & GDPR compliance
Safe ~48V installation and operation

Key functions

Ideal for EV site load support
Peak shaving
Balance market participation
Electricity market participation

Download datasheet

Požiadajte o cenovú ponuku

Fully integrated, pre-wired and factory configured system that reduces the installation time significantly.

The BESS that pays for itself by earning from electricity markets and saving cost through peak shaving and power boost.

Designed and manufactured in Europe. Combining robust engineering with high-quality components to deliver modular, scalable and reliable energy storage for critical applications and demanding environments.

Our 48V systems are built for always-on operation. Encrypted communications, secure remote access, and full GDPR compliance, enabling uninterrupted connectivity, real-time insight, and maximum ROI through value stacking.

Pixii BESS feature built-in redundancy, active monitoring, and automated recovery protocols. This ensures secure operation even under failure or cyber threat, ideal for mission-critical energy storage needs.

PowerShaper XLP is based on Pixii’s modular system architecture. Delivered pre-wired and pre-configured with Pixii Gateway included. Batteries can be delivered pre-installed to ease deployment.

Fully equipped with LFP batteries and hybrid cooling. Stores more than four times the energy and delivers over twice the power of the traditional PowerShaper. Built for intensive use.

Grid connection type

TT / TN

Phase config. (grid)

3ph

AC voltage (-10/+15%)

400V

Nominal frequency (grid)

50Hz

Nominal AC current

174Arms (3Ph+N+PE)

Max. AC current (input)

199Arms (3Ph+N+PE)

Nom. cont. AC power (±2%) ¹

100kW

Max. apparent power

100kVA

Max. reactive power

92kVAr

Power factor (Cos φ leading)

0.5 – 1

Power factor (Cos φ lagging)

0.5 – 1

THDi (grid connection)

<5%

Off-grid operation support

Generator backup support

1. The stated power and energy capacities are baseline, or nominal, values. Actual performance can vary and may be constrained by several factors, including the state of charge (SoC), state of health (SoH) of the system, as well as thermal conditions.
2. A 3-phase connection requires at least three PixiiBoxes, one for each phase.