Designed for energy- and power-oriented applications. Ideal for optimizing energy use through PV self-consumption, peak shaving and demand charge reduction, saving operational costs and meeting green targets
Fully integrated, pre-wired and factory configured system that reduces the installation time significantly.
The BESS that pays for itself by earning from electricity markets and saving cost through peak shaving and power boost.
Built for future-proof performance
Designed and manufactured in Europe. Combining robust engineering with high-quality components to deliver modular, scalable and reliable energy storage for critical applications and demanding environments.
Secure, connected, and compliant
Our 48V systems are built for always-on operation. Encrypted communications, secure remote access, and full GDPR compliance, enabling uninterrupted connectivity, real-time insight, and maximum ROI through value stacking.
Resilient by design, reliable in use
Pixii BESS feature built-in redundancy, active monitoring, and automated recovery protocols. This ensures secure operation even under failure or cyber threat, ideal for mission-critical energy storage needs.
Pre-wired, pre-configured
PowerShaper XLP is based on Pixii’s modular system architecture. Delivered pre-wired and pre-configured with Pixii Gateway included. Batteries can be delivered pre-installed to ease deployment.
Power intense with hybrid cooling
Fully equipped with LFP batteries and hybrid cooling. Stores more than four times the energy and delivers over twice the power of the traditional PowerShaper. Built for intensive use.
1. The stated power and energy capacities are baseline, or nominal, values. Actual performance can vary and may be constrained by several factors, including the state of charge (SoC), state of health (SoH) of the system, as well as thermal conditions. Time limited boost power is possible. Contact Pixii for details.
DC specifications
Installed capacity (max)
225.1kWh
Usable capacity (max)
202.6kWh
Max. system capacity
225.1kWh
Nominal DC voltage
~48V
Efficiency
Max. efficiency (inverter)
96.9%
Communication and connectivity
Wired interfaces
Ethernet LAN, RS 485 (Modbus), Digital IO
Wireless interfaces
Wi-Fi hotspot (local AP), 4G (optional kit)
Internal comm. protocols
CAN bus, Modbus TCP/RTU
External comm. protocols
MQTT
Safety
Ingress Protection (IP)
IP55
Protection class
I
Overvoltage category (OVC)
III
Max. short-circuit current
10kA
Min. required SC current
1kA
Operating conditions
Operating environment
Outdoor
Thermal management 1
Fan, Heater, Aircon
Operating amb. temp. range 2
-20 – +55°C
Operating relative humidity 3
5 – 95% NC
Max. operating altitude
2000m
1. Battery section is cooled via active air-conditioning, while the power conversion compartment (housing PixiiBox units) is fan cooled. 2. Derating from 45°C 3. Non-condensing.
Physical specifications
Dimensions (HxWxD)(mm)
2324x1194x1320
Net. weight (cabinet only)
618kg
Net weight (equipped) 1
2440kg
Color
RAL 7035
Status indicator (type)
–
Installed batteries (5U)
14
Max. batt. capacity (5U)
14
Installed PixiiBoxes
36
Max. PixiiBox capacity
36
1. Includes PixiiBoxes and batteries.
Battery
Battery ID
LFP 314Ah 16S 5U 19in A
Battery chemistry
LFP
Cells in series (qty)
16
Battery block capacity (Ah)
314Ah
Battery block capacity (kWh)
16.08kWh
Max. depth of disch. (DoD)
90%
Max. charge/discharge cur.
157/157A
Max. C-rate
0.5C
Rack height (Units)
5U
Over-current protection
Breakers, Electronic
Dimensions (HxWxD)(mm)
219.5x440x780
Net. weight (battery block)
125kg
Battery connection type
Quick
Cycle life (cycles @%DoD) 1
7600 (90%)
1. Temp. 25 ± 5°C and C-rate 0,5, EOL: 70% SoH
Warranty and compliance
Security and safety standards
IEC/EN 62040-1, IEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 62477-1, RED (2014/53/EU) – Cybersecurity (effective Aug 2025), RPEQ: Mechanically certified for lifting
Grid standards
AS/NZS 4777.2 (AU+NZ), EREC G99 (Type A & B) (UK), IEC/EN 50549-1 (Type A & B) (EU), VDE-AR-N 4105 (DE), VDE-AR-N 4110 (DE)
ETSI EN 300 019-2-1 (Class 1.2), ETSI EN 300 019-2-2 (Class 2.3), ETSI EN 300 019-2-3 (Class 3.2)
Regional compliance
Load Restraint Guide 2018 (AU)
Battery standards
IEC/EN 62619, UL1973, UL9540A, UN38.3
Warranty (years/cycles)
See note
1. Designed in accordance with the relevant national and international standards listed above. Certification to specific revisions available on request. Additional local requirements may apply. System approval pending. Currently valid for PixiiBox. 2. Warranty terms may vary based on your SLA agreement. Please review the warranty document for details.
