With integrated MPPT functionality the Pixii BESS is a complete DC coupled hybrid system. Our technology can also operate with most grid tied PV inverters, in on- or off-grid mode, ensuring optimal value of existing solar installations.
Arbitrage
Support loads from battery when electricity rates are high, and charge battery when electricity rates are low.
PV self consumption
Get the most out of your solar investment and reduce your dependency on the grid through smart power management, enabling you to re-direct excess power generation to batteries for later use during peak hours.
Reactive power compensation
Reduce the operational cost of your network by adding smart energy storage, allowing you to consume or generate reactive power, to improve the performance of your network and minimize energy losses.
FCAS (Frequency Control Ancillary Services)
Participate in the frequency control market with Pixii´s smart energy storage solution, allowing you to provide first-response frequency support and help stabilize the grid by taking part in VPP.
Flexibility markets
Unlock the value of your battery energy storage system and monetize your system’s flexibility by making your power and energy available for flexibility markets. (FCR-D, FCAS, FFR etc.)
Peak shaving
Reduce your demand charges and save cost by shifting your power dependency from grid to battery, shaving the peaks of your power consumption.
It also allows you to boost available power without having to upgrade your grid connection.
Active power compensation
Reduce the operational cost of your network by adding smart energy storage, allowing you to consume or generate active power, to improve the performance of your network.
Maintain the required grid frequency at all times, with our smart energy storage solution providing reactive short-term balancing to level out frequency deviations in the power grid.
AC back-up
Secure energy independency during power outages or grid restrictions.
Grid and voltage support
Improve quality of electricity supply for DSO’s (DNSP’s) on grids not prepared for the green transition. Through phase balancing, active and reactive power compensation, the Pixii BESS is a cost effective solution to quickly increase power capacity and ensure a supply of electricity within national regulations.
FFR (Fast Frequency Response)
Rapidly correct the load imbalance in less than 2 seconds with Pixii´s smart energy storage solution, making you compliant with oncoming demands and regulations to reduce inertia.
Genset integration
Take control of your diesel generators and get more useful energy per liter fuel consumed. Pixii makes it easy to integrate a generator into your system, providing additional energy to ensure service in off-grid and poor grid locations.
Community battery
Allow for shared battery storage embedded in your network, closer to the end-user, enabling customers to lower their energy bills by utilizing more of their generated renewable power, reducing carbon footprint and stabilizing the grid.
Frequency support
Provide first-response frequency support and stabilize the grid. Our power management and storage solution will contribute to even out the deviation from nominal grid frequency by adjusting active power to and from the grid.
Vehicle to home
With an AC output from your electrical vehicle you can utilize the EV battery to significantly extend the capacity of your enegy storage system.
MPPT (Maximum Power Point Tracking)
Maximize your energy extraction from solar panels in DC coupled hybrid solutions through PixiiBox’es operating as MPPT converters.
Phase balancing
Balance your three-phase load to provide utilisation of your upstream distribution network, by feeding power from phases with low load – to phases with high load and thereby stabilizing the phase voltages.