Energy storage 50kW
    Configure your system
    Output power:
    Select location and cooling:
    Select battery:

    Smart energy storage for apartment buildings

    Get more out of your solar investment and enable fast EV charging with Pixii´s smart battery energy storage system, reducing energy cost and making your building greener

    The Pixii PowerShaper2 is fully Integrated, and connects with all new or existing solar panels, allowing you to store excess energy for later use. With smart functionality you can store energy from the grid when the cost is low to use when the cost is high, or reduce the cost to your grid supplier by shaving off the peaks of your power consumption. Now you can provide fast EV charging, without upgrading your local grid.

    Our system is compact and modular, making it easy to scale and quick to deploy, with remote monitoring and management allowing for advanced optimization and predictive maintenance. Our 48-volt power architecture makes it safe and easy to hot-swap modules without powering down the system, with no special training required.

    With our range of services and support, including software enrichment upgrades, you will reduce your energy cost and be ready for the carbon neutral future.

    • Modular and scalable
    • For applications 10kW to 1 MW
    • Compact energy storage
    • Fast response (charge to discharge)
    • Integrated & battery inverter solution
    • Wide range of functions
    • Galvanically isolated AC to DC
    • 48V battery voltage for ease of service
    Support loads from the battery when electricity rates are high, and charge the battery when electricity rates are low.
    PV self consumption
    Get the most out of your solar investment and reduce your dependency on the grid through smart power management, enabling you to direct excess energy to batteries for later use during peak hours.
    Phase balancing
    Balance your three-phase load to provide utilization of your upstream distribution network, by feeding power from phases with low load – to phases with high load and thereby stabilizing the phase voltages.
    Reactive power compensation
    Reduce the operational cost of your network by adding smart energy storage, allowing you to consume or generate reactive power, to improve the performance of your network and minimize energy losses.
    Frequency support
    Provide first-response frequency support and stabilize the grid. Our power management and storage solution will contribute to even out the deviation from nominal grid frequency by adjusting active power to and from the grid.
    General data
    Max Power (bi-directional)
    Up to 50 kW
    Nominal AC voltage
    50 or 60Hz
    Max AC current (50kW):
    Nominal DC voltage
    Max DC current (50kW)
    Communications protocols
    M-bus, Modbus RTU, TCP/IP Ethernet, 4G Wi-Fi
    Maximum operating temperature
    45 °C
    Minimum operating temperature
    Dimensions (w x d x h)
    706x895x2120 mm
    Weight (fully equipped)
    600-800 kg
    Cabinet protetion class
    IP 55
    Environmental management
    Fan Cooled (Aircon Optional)
    Application standards
    IEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 62040-1, IEC/EN 62477, (Batteries) IEC 62619, IEC 62368, UN38.3
    AS/NZS 4777-2, VDE-AR-N 4105, 50549-1,TF 3.3.3 B1, EREC G99 (others pending)
    IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, IEC/EN 61000-6-4
    ETSI EN 300 019:2-1 (Class 1.2), ETSI EN 300 019:2-2 (Class 2.3), ETSI EN 300 019:2-3 (Class 3.2)
    Documentation and downloads
    Narrow your search by:
    Your filters:
    File name
    File type

      Please fill the form to receive the file(s) download link. Zip files will be accessible for 1 day.

        Configure your system
        Output power:
        Select location and cooling:
        Select battery:
        Building blocks
        How does it work?
        With cutting-edge technology, the Pixii modular energy storage solution gives you a range of functionality, allowing you to unleash your growth potential.